Prezzo Online: 30,00 €
HP OneLam 270 A4. Massima ampiezza laminatura: 23 cm, Tipo: Plastificatrice caldo, Tempo di preriscaldamento: 4 min. Consumi: 230 W, Tensione di ingresso AC: 220 - 240 V, Frequenza di ingresso AC: 50 - 60 Hz. Larghezza: 332 m...
Invio in 48h a 96h
Brand: HPI market
Modello: 3167
EAN: 4030152953226
Codice: P437469
Consegna Standard (48h/72h): €18
Consegna Espressa (24h): €58
The HP OneLam 270 A4 is a compact laminator intended for a variety of uses ranging from hobby to home office requirements and fits on any desk. The modern device is only intended for hot laminating and can seal documents from the size of visiting cards to A4 documents. After switching on the main On/Off switch, the laminator heats up to the same temperature for all foil thicknesses and this practical machine is ready for use in under 4 minutes. In order that you can enjoy using the laminator immediately, five 80 micron A4 foils are contained in the HP OneLam 270 A4 package supplied
The reliable HP OneLam 270 A4 does not only enable you to to laminate your recipes, photos or drawings by your children but also playing cards and bicycle maps can be laminated as long as the overall thickness, including lamination foil, does not exceed 0.5 mm.
The laminator, in its grey-white design, operates at a speed of 270 millimetres per minute and, as a result, can seal an A4 document in a little over 60 seconds.
The laminator has been conceived for lamination foils with a foil thickness of 80 micron up to 125 micron.
The laminator is equipped with a main On/Off switch as well as a lever to unlock the rollers: If you inadvertently insert the foil in the laminator at an angle, it could lead to a foil jam. After unlocking the rollers, the lamination foil is released and can be pulled out, carefully, from the infeed side to clear the foil jam.
Plastificatrice HP OneLam 270 A4
HP OneLam 270 A4. Massima ampiezza laminatura: 23 cm, Tipo: Plastificatrice a caldo, Tempo di preriscaldamento: 4 min. Consumi: 230 W, Tensione di ingresso AC: 220 - 240 V, Frequenza di ingresso AC: 50 - 60 Hz. Larghezza: 332 mm, Profondità: 120 mm, Altezza: 63 mm
| Dettagli tecnici | |
| Dimensioni e peso | |
| Larghezza | 332 mm |
| Profondità | 120 mm |
| Altezza | 63 mm |
| Peso | 940 g |
| Gestione energetica | |
| Consumi | 230 W |
| Tensione di ingresso AC | 220 - 240 V |
| Frequenza di ingresso AC | 50 - 60 Hz |
| Dati su imballaggio | |
| Certificati di sicurezza | |
| Contenuto dell?imballo | |
| Batteria | |
| Altre caratteristiche | |
| Caratteristiche | |
| Massima ampiezza laminatura | 23 cm |
| Tipo | Plastificatrice a caldo |
| Tempo di preriscaldamento | 4 min |
| Velocità di taglio | 270 mm/min |
| Spessore massimo | 0,5 mm |
| Display incorporato | No |
| Formato | A4 |
| Spessore minimo della pellicola | 80 µm |
| Spessore massimo della pellicola | 125 µm |
| Durata di preriscaldamento | 4 min |
| Combinazioni flusso d?aria/temperatura | 1 |
| Temperatura (max) | 120 °C |
| Colore del prodotto | Grigio, Bianco |
| Spia | Sì |
| Funzione inversa del motore | Sì |
| Indicatore di raggiungimento della temperatura | Sì |
| Facile da utilizzare | Sì |
| Dati logistici | |
| Avviso di sicurezza | |
| Composizione del prodotto | |
| Sostenibilità | |
Potrebbe anche interessarti:
Stesso prezzo: